Tips and Troubleshooting for the May Block

Posted by on April 30, 2010 in blocks | Comments Off on Tips and Troubleshooting for the May Block

Here are my tips for making the Reeds blocks.  If you have made the block and have tips for solving any of the problems you encountered, please add them in the comments.

Thread color matters this month, especially for white and black backgrounds.  If you use a contrasting thread, it is mostly likely to show on the seams where you insert the background bias into the background.

Be sure to cut the bias as true bias on a 45 degree angle (align the 45 line on your rotary ruler with the selvedge edge or cross grain), so that you’ll have as much stretch as you need. 

Always sew the curved seams with the bias strip on top, so you can easily manipulate it.  I slightly stretched the bias on outside curve edge and eased it a little on inside curve.

I stitched all of my blocks WITHOUT pins, concentrating on the inch or two in front of the needle as I sewed.

Always sew with the bias strip on top. Sewing with Bias on Top

If you are having problems inserting the bias “reeds,” then trim them narrower.

If you are using too-thin fabric, you may have problems pressing the block and will end up with lots of puckering when you use steam . . . ask me how I know 😉

Press the seams in whichever direction will result in a flat, uncrinkled block.  The first thing to try if you are having problems pressing the seam is to try pressing the seam in the other direction.

Social media & sharing icons powered by UltimatelySocial